T-Rivet Rivets

Break Head Open
Open rivet that sets flush on both sides of the application when set into a double countersunk hole. This space saving rivet offers near zero protusion and eliminates loose mandrels.

Break Stem Open
General purpose open rivet available in wide range of materials and head styles. Suitable for applications with low load bearing requirements.

Closed End
Designed with a completely closed body, this rivet is ideal for applications that need to be water/pressure tight or where mandrel retention is paramount.

F Series
F series provides excellent hole fill for superior vibration resistance combined with a locked, rattle free mandrel that results in great joint construction.

Grooved
Aluminium rivet for fixing into wood and other soft/fibrous base materials. Suitable for use in blind non-through holes.

HR (High Retention)
Exceptional pull-up capability and increased blind side expansion give the perfect combination for overcoming air gaps whilst spreading the load during setting. Excellent mandrel retention and rattle resistance after setting.

LSR (Load Spreading Rivet)
Load spreading characteristics make this rivet ideal for use in vulnerable, friable and the softest of materials.

MGR (Multi-Grip Rivet)
The Multi-Grip rivet is designed to accommodate a wider grip range than other rivets allowing for lower inventory levels. Also provides good, rattle free, joint construction even in irregular holes.

Peel
Ideal for joining softer and more brittle materials such as plastics, rubber, wood, GFRP or laminates.

Removable Rivet

Soft Set
This steel rivet has a peeling body ideal for use in wood and providing high resistance to pull out loads and mandrel head retention.

T-Rivet
The T-Rivet offers all the features of a peel rivet with the added benefit of pull-up. Improved shear strength is also achieved due to mandrel head retention after setting.

TVD
This unique closed end stainless steel range provides additional support to assemblies where weak or thin blind side materials are present.

120° Countersunk
For use wherever a flush surface is required.

Large Flange
For use where thin or vulnerable materials are fastened to a rigid backing. The large flange is also useful for covering enlarged holes or slots in the upper component.

Low Profile Domed Head
Standard low profile head, suitable for most applications.

Softer setting aluminium suitable for more vulnerable materials

General purpose use

Harder aluminium suitable for applications requiring higher shear and tensile strengths

Maleable aluminium suitable for extremely soft and/or brittle materials

Provides good electrical and thermal conductivity

Suitable for extremely hostile and high temperature environments

Suitable for applications in hostile or clinical environments

General purpose use

You can enter part of the part number to list all matching products.

Enter "TAP"
To find "TAPD301BS" and "TAPK633BS"

Enter "410"
To find "AD410SB" and "TD410GT"